GeeekPi Mini Tower NAS Kit for Raspberry Pi 4, Pi 4 ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

Generate a 100-character excerpt from the product description below. Return ONLY the excerpt text, without any prefixes, notes, or explanations. Example: “Compact wireless speaker with 12-hour battery life and waterproof design.” Product description:
Product Description

Description:

This kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi.

The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host.

NOTE:

The RGB light in Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!!

Please read the manual carefully and follow the steps to enable it.

Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!

Technology support:

wiki.52pi.com/index.php?title=ZP-0130-4wire

Features:

It provides independent QC3.0 power supply

0.96 inch OLED display, 128x64pixels, default I2C address: 0x3C

M.2 SATA SSD 2280/2260/2240 mass storage adapter board

Multiple ASMedia Chip Compatibility:ASMedia Technology ASM1051E SATA 6Gb/s bridge;ASM1053E SATA 6Gb/s bridge;ASM1153 SATA 3Gb/s bridge;ASM1153E SATA 6Gb/s bridge

Supports Mass Storage Driver: UAS

Supports LED indicator for disk activity status

Supports booting up from SSD method.

USB3.0 connector (Data Transfer)

Ice Tower Heat dissipation system

RGB Programmable Fan light and mood light (WS281X)

Foolproof power connector for OLED screen and Fan

Supports taking power from the GPIO pin of the Raspberry Pi through the Pogopin to supply power to the disk adapter board (5V@3A)

Transfer Speed is up to 272MB/s

Package Includes:

1 x ABS Mini Tower Case

1 x ICE-Tower CPU Cooling Fan

2 x Acrylic Side Panel

1 x 0.96inch OLED Display (Already mounted on the case )

1 x GPIO Edge expansion board

1 x M.2 SATA SSD Shield

1 x QC 3.0 Power supply

1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package)

This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host.
NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!
The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C
M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive
Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package)