Product Description
Specifications
Include Zero-Pi Fighting Board EASY x1, Brook Inside sticker x1 Support game console Switch/PS/PS2/PS3/PC(X-Input)/Retro Gaming System SOCD Built-in SOCD cleaner Left+Right=Neutral, Up + Down = Up Emulate TouchPad X Analog LS, RS, DP functions O Turbo O firmware update O Size / Weight 4.7*10.2*1.4cm / 29.4g installation method [with pin header] The pin header has been soldered and can be used directly with the Brook Fighting cable.
Time to build an arcade stick for your SWITCH!
The ZERO-Pi fighting board supports to be used wired on Switch/PS3/PS2/PS/PC(X-Input)/Retro Gaming System, it also supports LED, and turbo function.
For Effortless Installation, New EASY version with Screw Terminal block is ready!
Features
Different kinds connectors for USB USB Type-B/5-pin header connector/4-pin header connector/4-pin.Turbo Function.Support Player LEDs.Built-in SOCD cleaner Left+Right=Neutral、”Up priority” in all Up + Down = Up.Support Auto-Detect & Manual to select Switch & PS3 consoles.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Product Comparison
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.7 out of 5 stars 108
—
4.6 out of 5 stars 220
4.4 out of 5 stars 82
4.6 out of 5 stars 185
4.6 out of 5 stars 113
Price
$29.99$29.99
—
$60.00$60.00
—
—
$89.99$89.99
Feature
Easy Install
Wireless & Wired Support
Multi Console Support
XB Series Support
Audio Support
Multi Console Support
XB Series Console Support
—
—
XB 360/Original
XB Series X/S/One/360/Original
—
XB 360 / XB Original
PS Series Console Support
PS3 / PS2 / PS
PS4 / PS3
PS4 / PS3
—
PS4 / PS3
PS5 Fighting Games/PS4/PS3
Switch/PC Consaole Support
Switch/PC/PC (X-Input)
Switch/PC/PC (X-Input)
Switch/PC/Wii U
PC/PC (X-Input)
Switch/PC/PC (X-Input)
Switch/PC/Wii U
Retro games Consaole Support
Retro Gaming System
—
MD mini/NeoGeo mini/PS mini
—
—
MD mini/NeoGeo mini/PS mini
Support play PS4 Games on PS5
✘
✔
✔
✘
✔
✔
Compatible with UFB-UP5
✘
✘
✔
✘
✔
✘
Turbo
✔
✔
✔
✔
✔
✔
Support Switch/PS3/PS2/PS/PC/Retro Gaming System
Full-Compatible with BROOK Fighting Cable
*BROOK Fighting Board Cable is not included
Easy install with screw terminal
Effortless installation and Upgradable firmware
Do I need to do firmware update if there’s new release ?
As long as you can use the converter without any problem, you don’t have to do firmware update.
How do I use Zero Pi on PS2/PS?
Connect a PS2 cable to J15.
How to set and clear turbo?
To set: Hold down Turbo Key + turbo available buttons.
To clear: Redo the procedure above again to clear turbo setting.
What should I pay attention to for firmware update ?
-Firmware update must be done on a PC, it cannot be done on a console, do it on Windows 7(and above) or Mac and make sure the PC has smooth internet stream.
-Disable antivirus when operating.
-Don’t remove the converter while update is running.
Neither the console nor the PC recognizes the board.
If none of the methods below helps, the board can be defective.
-Try other usb cables.
-Go to Devices and Printers on PC(Windows10) to see if the board is recognized.
Zero Delay fighting board supports to be used wired on Switch, PS3, PS2, PS, PC(X-Input) and Retro Gaming Emulator
Full-Compatible with Brook fighting cable, screw Terminal Header Included for effortless installation.
Built-in SOCD cleaner
Support Player LEDs, Turbo Function and Upgradable Firmware
Support Auto-Detect & Manual to select Switch & PS3 consoles. Hold on button then plug into consoles. 1P : PS3 / 1K : Switch
